Raynor’s OptiFinish Solution

optifinish-logoWe often forget that maintaining a steel garage door is an absolute must to ensure overall aesthetic quality for one’s house. With Raynor OptiFinish solution for steel garage doors, this customizable option allows customers the ability to paint their garage doors any color they choose complete with a durable finish that will look great for years.

More than 1,800 colors are now available on any Innovations and Traditions garage door, which allows the door to be painted after the section is built. Raynor’s Optifinish solution can be applied to Affina, Centura and Relante doors in the Innovations line and to Masterpiece and Showcase doors in the Traditions line.

This innovative process features durable Sherwin Williams BP Enamel paints that applies a third layer of paint to the pre-painted and galvanized steel, adding another layer of protection to the garage door to help prevent weathering, fading, cracking or peeling.

If you’re interested in learning more about Raynor Optifinish or considering this option for your door, call FS Construction Services today at 866-551-3454 or visit Raynor Optifinish. We’d be more than happy to discuss and assist you with all your garage door needs.

Boomer’s Corner – Six Common Paint Problems

Summer is almost over, which means it’s time to complete all those projects you’ve wanted to get done this season, specifically those paint projects. But, you might be hesitant when remembering all the DIY paint problems you could inevitably run into. Well, I’ve been where you are and I have six different problems that can be easily fixed.

1. Fish Eyes – This is when you paint over oil, dirt, silicone or incompatible coatings. Luckily, fixing fish eyes is a breeze. All you’ll need to do is to remove all greases and oils with a cleaning solution. The best choices for cleaning aids are bleaches, thinners or TSP. Then, you’ll want sand the area to remove the underlying problem. As a last resort, you might have to sandblast.

2. Cratering and/or Pitting – This is when air pockets get trapped in your wet film. The solution to this problem is to sand or smooth out the existing finish and then simply apply another coat.

3. Uneven Gloss – The cause for this problem is non-uniform film thickness, moisture in the coating, but mostly the topcoat may have been applied over primer before it was dry. Fixing this problem is simply letting the primer completely dry.

4. Fading – This is a very common problem for all painters. I found out the biggest thing to this is the pigment in your paint and the ultraviolet rays reacting with the paint. If moisture gets trapped behind the coating, this will cause fading. The best solution is to use a paint already colored from the factory. These types of paints have powder tint instead of liquid. I have colors already tinted for your roof or I can tint them myself. I painted a few green, red, black and they hold up well. As a reminder, dark colors draw the ultraviolet rays to your roof faster.

5. Wrinkling – This is when there’s just too much paint in the application. To fix this problem, you need to remove the paint and recoat. Haste makes waste!

6. Blistering – This is when a solvent or moisture gets trapped in or on the surface. The best solutions to blistering are adequate ventilation of air across your coating film or cleaning the surface that is contaminated.

As your paint specialist, I myself have come across each of these problems and I hope my suggestions and tips will help you with your projects. If you wish for an estimate, you can reach me at 618.972.9516 or bgarleb@gatewayfs.com.