FS Construction Services grain systems rearranging

Project Profile: Rearranging a Farm

Most people have experienced the feeling of looking at a room, or a garage, or a cabinet, or a tool bench and realizing that things just aren’t where they should be. That if you were to rearrange everything a certain way or organize items a little differently, then your space would be a lot more enjoyable and a lot more efficient. And usually, this happens over and over again as the years go on.

Unfortunately, this process is a whole lot harder when it comes to farm equipment. However, here at FS Construction Services we like a good challenge, and so when a client reached out to us about a reorganization job involving grain bins, we were happy to help.

First, we built a brand new 42’ tall, 7-ring Sukup grain bin with a bushel capacity of 34,000. This storage container also included two 10hp centrifugal fans, stairs, and a 10” unload. Our client wanted this new bin in a different location than the previous bins, and so to get everything in one convenient place, we not only moved two 24’ grain bins but we also added rings to them. Additionally, we built a new set of stairs between the old bins and added new floors and an unload.

While no small task, this act of reorganization plus the addition of a new bin will set our client up for success not just in the present, but well into the future. The increased efficiency and ease of use should be a great help to our client for many years to come.

Whether you’re looking for a brand new grain storage system or you are looking to retrofit or update an old one, please let Gateway FS Construction Services know. Give us a call at 866-551-3454, and let our specialists help you find exactly what you are looking for. We look forward to providing you the best customer service experience.

FS Construction Services painting services surface prep

Surface Prep to Avoid Painting Disaster

A fresh of coat of paint is one of the fastest ways to make something look brand new. Unfortunately, a poorly applied fresh coat of paint is one of the fastest ways to be disappointed. Lots of things can go wrong during the painting process and any one of them can ruin your hard work.

FS Construction Service’s resident paint expert Brian Garleb has provided some helpful tips about how proper surface preparation can prevent a whole host of headaches and wasted effort.

First off, painting after wallpaper removal. Removing wallpaper can be a chore, and it can cause damage to drywall that makes painting after a tricky process. Luckily, there’s a solution. Rather than painting over the damaged drywall and hoping for the best, applying a problem sealer coating can lock down the torn drywall or other unstable surfaces like crumbling textures by creating a hard, moisture-resistant foundation that won’t bubble. Damaged drywall should be clean, dry, and free of buildup or leftover wallpaper adhesive before applying the sealer. After the sealer has been applied, the wall can be painted.

Next is the trouble of peeling paint. Peeling paint can be sanded and scraped, but if you’re painting an outdoor surface, peeling paint tends to be a problem that takes more than just a little scraping. Instead, let a power washer do the removal for you. At the right pressure and the right distance, a power washer will remove peeling paint without damaging the surface underneath. After the old paint has been removed, apply a clear building sealer to fill cracks and glue down blistered areas. A sealer can act like a primer, so when it’s dried, it can be safely painted over.

Painting is always simple in theory and nuanced in practice. If you have any questions about painting or need someone to tackle a difficult or timely job, please let Gateway FS Construction Services know. We can even match your current color using X-Rite Color Matching. Give us a call at 866-551-3454, and let our specialists help you find exactly what you are looking for. We look forward to providing you the best customer service experience.

FS Construction Services grain systems

Good Grain Means Good Care and Good Equipment

At FS Construction Services, we know that grain has to be taken care of. A small pocket of bad grain in storage can spread and have disastrous ramifications. When grain is stored before it’s completely cleaned and dried it can mold and rot, and damp grain is an open invitation for harmful insects.

When it comes to storing grain there are lots of things that can go wrong at any point in time during the process. Outdated or improperly working equipment can damage grain or fail to clean it or dry it properly, causing widespread loss and low-quality product.

There are a number of practical things that can be done to ensure your grain quality. Slow drying grain limits stress, running handling equipment at low speeds prevents unnecessary damage, and avoiding unnecessary steps means fewer overall opportunities for things to go wrong.

And while these things are crucial to keep in mind, it’s also true that the equipment used to handle that grain has to be up for the job. A good grain distributor will prevent fine material buildup. If material is allowed to collect on the grain mass, it creates moisture buildup and poor aeration. Keeping grain well stirred evens out the temperature and prevents pockets of heat and from building. A high-functioning grain dryer will keep unnecessary moisture from ruining whole batches.

At FS Construction Services, our many partner relationships guarantee that we’re able to help our clients find the right product for the right price. Our job isn’t to find the most expensive solution, but the solution that works best for you, whether that means something new, something updated, or something unique.

If you are in the market for grain storagegrain drying, or grain handling equipment, please let Gateway FS Construction Services know. Give us a call at 866-551-3454, and let our specialists help you find exactly what you are looking for. We look forward to providing you the best customer service experience.